How Do I Know What Hard Surface Floor I Will Be Cleaning? – Floor Identification Series – Part 6 of 7 parts

Image

By Doyle Bloss

Chemical Brand Manager

HydraMaster/US Products

Testing Procedures for Floor Identification:

There are actually six different “tests” or evaluations you can perform to zero in on the type of floor you are being asked to clean. This post is going to focus on the 5th test or evaluationthe Moh’s Hardness Test, sometimes called the scratch test.

5. The Scratch (or Hardness) Test. The scratch test for stone is based on a scale developed by Friedrich Moh in 1822. It

  1. Imagemeasures the relative hardness of natural stone
  2. It is ranked on 10 steps. There is great variation in the “steps.
  3. Essentially, you are determining what scratches what.
  4. Here are some ratings of some common materials
  •  2.5 – Fingernail
  • 2.5-5 – Marble (most is 3 – 4.5)
  • 2.5-5 – Limestone (most is under 4 but some limestone is  harder.)
  • 5.5 – Steel knife or nail
  • 7 and above – Glazed ceramic or porcelain
  • 7-8 – Granite

Choose your tool to scratch with

  • Quartz = 7
  • Steel nail = 5.5
  • Fingernail = 2.5

Try to scratch the stone with a sharp corner of your toool

  • Do the reverse – Try to scratch your tool with the stone
  • By determining “What scratches what” or “What is equal“ you can make judgments about hardness
  • If a floor is hard and difficult to scratch, it is probably a man-made ceramic or porcelain tile.
  • The exception is granite, which is natural, but is difficult to scratch
  • Softer stone such as travertine, marble, limestone, and slate will all scratch to differing degrees with this test procedure.
  •  If a floor is hard and difficult to scratch, it is probably a man-made ceramic or porcelain tile.
  • 4. 5.5 is an important dividing line. Every stone below 5.5 will show scratches. Every stone above 5.5 like granite and quartz will not. That is why they use granite for kitchen countertops.

Cleaning application – on softer stone, precautions must be taken to not scratch the surface of the floor when using a rotary Imageextraction tool. If the floor did scratch when tested or has an epoxy urethane finish that will scratch, use the brush ring on your rotary extraction tool.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s